The Blaster 2.0 (SATU020) has an intentionally oversized, unisex fit. Use the garment measurements below to choose the fit you prefer. These are measurements of the shirt itself, not measurements of your body.
Fit tip: Choose your usual preferred size for the intended oversized silhouette. If you prefer a less oversized look, compare the chart with a T-shirt you already own and consider the garment measurements rather than automatically sizing up.
Blaster 2.0 SATU020 — Size Chart
All measurements are in inches.
| Measurement | XXS | XS | S | M | L | XL | XXL | 3XL |
|---|---|---|---|---|---|---|---|---|
| A — Half chest | 23.25 | 24 | 24.75 | 26.5 | 28 | 30 | 32 | 33.75 |
| B — Body length | 27.25 | 28 | 28.75 | 29.5 | 30.25 | 31.5 | 32.5 | 33.5 |
| C — Sleeve length | 9 | 9.25 | 9.5 | 9.75 | 9.75 | 10 | 10.25 | 10.5 |
How to compare measurements
- A — Half chest: Lay a similar shirt flat and measure straight across the chest from side to side.
- B — Body length: Measure from the highest point of the shoulder beside the neckline down to the bottom hem.
- C — Sleeve length: Measure from the sleeve join near the shoulder to the sleeve opening, following the garment measurement shown in the diagram.
For the closest comparison, lay a shirt you like flat and compare the same points. Small manufacturing tolerances can occur. If you need help choosing, email deonanthonysales@gmail.com.
Fabric and care
The Stanley/Stella Blaster 2.0 SATU020 is an oversized mock-neck T-shirt made from 100% organic ring-spun combed cotton single jersey at 200 GSM. Wash cold, do not bleach, tumble dry low, iron on low heat, and do not dry clean.